About this project
Summary of work
Improvements are being made on Hwy 14 from east of Hwy 56 in Dodge Center to west of Co. Rd. 5 / 2nd Ave. in Byron. Construction started April 14, 2024. It is anticipated the project will be completed late summer 2024. The project includes the following improvements:
- Construct a J-turn at Hwy 14 and Co. Rd. 9
- Install a high-tension cable median barrier between Dodge Center and Kasson
- Resurface pavement between Kasson and Byron
- Improve and repair drainage
- Rehabilitate the eastbound and westbound Hwy 14 bridges over Hwy 57. The work includes new end posts, approach panels and expansion joints
- Upgrade the Road Weather Information System (RWIS) site near Byron with new pavement sensors and processing unit
Construction stages
Construction will occur in two stages; outside and inside lanes. The bridge improvements at Hwy 57 will start with the inside lanes.
Background
During the public engagement and design phase of the Hwy 14 project, information was shared on the public engagement website. It also provided opportunities for the community to share their input about the project.
Traffic impacts
Hwy 14 ramp closures at Kasson
The Hwy 14 eastbound on-ramp from Hwy 57 and the Hwy 14 eastbound off-ramp to Hwy 57 are scheduled to be temporarily closed on July 1 when crews pave the ramps, weather permitting.
Detours during J-turn construction at Hwy 14 and Co. Rd. 9
Vehicles will not be able to access Hwy 14 from Co. Rd. 9. It's anticipated that construction of the J-turn will be completed mid-July.
- Vehicles to the north of Hwy 14 will be detoured west on Co. Rd. 34 to southbound 200th Ave./Airport Dr. N to Hwy 14.
- Vehicles to the south of Hwy 14 will be detoured west on Co. Rd. 10 to Co. Rd. 25/Airport Dr. S to Hwy 14.
Reduced lanes on Hwy 14
One lane of traffic in each direction on Hwy 14 will be open throughout construction.
Detour at Hwy 57
There will be a detour for the bridge improvements at Hwy 57. It is anticipated the detour will last a couple days. Exact dates will be shared on this website and through the project update email.